5240 Series Maxxum Tractor
Specification CASE IH 5240
ENGINE
PTO hp (kW) 100
Cu in Disp (L) 359 (5.9)
Bore x Stroke-in 4 X 4.7
Rated Speed - rpm 2200
No of Cylinders 6
Aspiration Turbo
TRANSMISSION
Synchronized Trans Standard
Spd fwdirev (synchro) 16112
Synchronized Shifts 16
Powershift Trans Optional
Powershift Type In Line
Spd fwd/rev (power) 16/12
Power Shifts 4
Shuttle Trans Standard
Shuttle Engagement Hydraulic
Creep speeds-fwd/rev 8/8
Creep speed range 0.18-0@75
Clutch (Std/Opt)(in) Multi DisctWet
HYDRAULICS
Type PFC
Pump flow gpm-std/op 20.1
Flow @ remotes-gpm 15.0
Press @ pump-psi 2750
Press @ remotes-psi 2393
No remotes std/opt 1/4
HITCH & PTO
Lift cap@24"-Ib-std/op 7700
Draft sensing-stdiopt Lower Link
PTO-rpm std/opt 540/1000
PTO Shaft Type Reversible
Specification CASE IH 5240
s
2WD (Std) Range-in 60-88
MFD Range-in 60-88
MFD Oscillation 12 degrees
Min turning radius-ft
2WD w(w/o)/brakes 12.0 (13.0)
MFD Disengaged 14.4
REAR AXLES
Bar axle tread range 60"-l 1 0"
Bar axle diameter-in 3 1/2"
Flange axle tread range 60"-88"
Differential Lock Elec/Hyd
Planetary 4 pinion
GENERAL
Wheelbase (in) (2wd) 104
Wheelbase (in) (mfd) 102
Wt 2WD w/cab-lbs 9810
Wt MFD wlcab-lbs 11,090
Fuel Cap-gal (std/opt) 35.7/45