7200 Series Magnum Tractors

Specification CASE IH 7240

ENGINE Case IH 8.3L

Adv PTO hp(kw) 195 (145)

Cu in Disp (L) 505 (8.3)

Operating RPM 2200

Op torque-lb ft (Nm) 561 (761) @ 1500 rpm

Peak torque-lb ft (Nm) 701 (950) @ 1500 rpm

Aspiration Turbo/Aftercooled

TRANSMISSION Full Powershift

Speeds fwd-rev/opt 18-4/24-6

On the go wo clutch

w/o clutch/opt 18/24

Field speeds/opt 7/7

Clutch Type Wet Disc

Type of Fwd/Rev Shti Shft Power

REAR AXLE

Diameter-in(mm) 4 (102)

Length Std-in(mm) 114 (2896)

Length Opt-in(mm) 120 (3048)

Std tread adj-in(mm) 60-133 (1524-3378)

Opt tread adj-in(mm) 61-133 (1549-3378)

Max dual tread cap-in (mm) 162 (4115)

MFD axle tread adj-in (mm) 60-95 (1524-2413)

MFD turning radius

w/tire size 14.9 x 30 Rl

@ tread sefting-in 64.5

Center drawbar-ft(m) 17.4

Center out tire, in set -ft(m) 20.0

HYD.SYSTEM PFC

Pump flow US-gpm(L) 28.5 (108)

Flow @ remotes-gpm 2.5-22 (9.5-83.3)

Press - psi (kPA) 2,650 (17926)

Adv hitch cap,lb(kg) 12,760 (5800)

Opt hitch cap,lb(kg) 14,950 (6781)

Specification CASE IH 7240

GENERAL

Cab glass area-sq ft(m) 47.7 (4.43)

Fuel Cap-gal(L) 95 (360)

Avg Shipping Wt-lb(kg)

2WD 15,825 (7169)

MFD 16,845 (7630)

Max Vehicle VW-lb(kg) 25,500 (11567)