| ||
| PTO hp at 2,200 engine rpm | 160 (119 kW) | 180 (134 kW) |
| Rated speed | 2,200 rpm | 2,200 rpm |
| Type | In-line, 6-cylinder,
wet-sleeve, valve-in-head | In-line, 6-cylinder,
wet-sleeve, valve-in-head |
| Aspiration | Turbocharged and air-to-air aftercooled | Turbocharged and air-to-air aftercooled |
| Displacement | 466 cu. in. (7.6 L) | 466 cu. in. (7.6 L) |
| Bore and stroke | 4.56 x 4.75 in. (115.8 x 120.7 mm) | 4.56 x 4.75 in. (115.8 x 120.7 mm) |
| Compression ratio | 15.0 to 1 | 15.0 to 1 |
| Lubrication | Full-pressure, full-flow filtration with bypass | Full-pressure, full-flow filtration with bypass |
| Cooling system | Gear-driven centrifugal pump, with recovery tank | Gear-driven centrifugal pump, with recovery tank |
| Replaceable valve-seat inserts | Inlet and exhaust | Inlet and exhaust |
| Type | In-line, fuel injection with electronic governor | In-line, fuel injection with electronic governor |
| Filter | Spin-on primary filter with water separator bowl and clamp on final filter | Spin-on primary filter with water separator bowl and clamp on final filter |
| Type | 16-speed Power Shift; 16 F, 4 R | 16-speed Power Shift; 16 F, 4 R |
| with two batteries | ||
| Alternator | 140 amps | 140 amps |
| Total cold cranking amps | 1850 | 1850 |
| Final Drive type | Inboard planetary | Inboard planetary |
| Axles: | Rack-and-pinion | Rack-and-pinion |
| 110.5 in. (2808 mm x 100 mm) | Optional | Optional |
| 118.5 in. (3012 mm x 100 mm) | Standard | Standard |
| 118.5 in. (3012 mm x 110 mm) | Optional | Optional |
| Differential lock | Electrohydraulic | Electrohydraulic |
| 2WD tread range | 60 to 84 in. (1,524 to 2,134 mm) | 60 to 84 in. (1,524 to 2,134 mm) |
| MFWD tread range | 60 to 88 in. (1,524 to 2,235 mm) | 60 to 88 in. (1,524 to 2,235 mm) |
| Type | Closed-center, pressure/flow compensated | Closed-center, pressure/flow compensated |
| Selective control valves | 3 standard | 3 standard |
| Additional valves | 4th and 5th optional | 4th and 5th optional |
| Main pump | Axial piston | Axial piston |
| Primary and charge pump | Gear pumps | Gear pumps |
| Maximum pressure | 2,900 psi (20,000 kPa) | 2,900 psi (20,000 kPa) |
| Rated flow at pump | 30 U.S. gal./min. 25 Imp. gal./min. (1.9 L/s) | 30 U.S. gal./min. 25 Imp. gal./min. (1.9 L/s) |
| Available flow at SCVs | 30 U.S. gal./min. 25 Imp. gal./min. (1.9 L/s) | 30 U.S. gal./min. 25 Imp. gal./min. (1.9 L/s) |
| Category | 3/3N | 3/3N |
| Sensing | Electrohydraulic | Electrohydraulic |
| Standard lift capacity | 10,400 lb. (4,717 kg) | 10,400 lb. (4,717 kg) |
| Optional lift capacity | 14,165 lb. (6,425 kg) | 14,165 lb. (6,425 kg) |
| Type | Independent | Independent |
| 13/4-in. 1,000 rpm | Standard | Standard |
| Additional 13/8-in. 1,000/540 rpm adaptor | Optional | Optional |
| Type | Hydrostatic power | Hydrostatic power |
| Type | Power, hydraulic wet-disk | Power, hydraulic wet-disk |
| Fuel Tank | 135 U.S., 112.5
Imp. gal. (512 L) | 135 U.S., 112.5
Imp. gal. (512 L) |
| Cooling system | 28.8 U.S., 23.9
Imp. qt. (27.2 L) | 28.8 U.S., 23.9
Imp. qt. (27.2 L) |
| Crankcase | 22.7 U.S., 18.9
Imp. qt. (21.5 L) | 24.8 U.S., 20.7
Imp. qt. (23.5 L) |
| Transmission, differential, hydraulic systems | 148 U.S., 123 Imp.
qt. (140 L) | 148 U.S., 123 Imp.
qt. (140 L) |
| MFWD differential | 11.5 U.S., 9.6 Imp.
qt. (10.9 L) | 11.5 U.S., 9.6 Imp.
qt. (10.9 L) |
| MFWD wheel hubs, each | 3.2 U.S., 2.6 Imp.
qt. (3.0 L) | 3.2 U.S., 2.6 Imp.
qt. (3.0 L) |
| 2WD | 122.8 in. >(3,120 mm) | 122.8 in. (3,120 mm) |
| MFWD | 116.1 in. (2,950 mm) | 116.1 in. (2,950 mm) |
| MFWD axle clearance | 23.2 in. (590 mm) | 23.2 in. (590 mm) |
| 2WD | 16,435 lb. (7455 kg) | 16,457 lb. (7,465 kg) |
| MFWD | 17,876 lb. (8108 kg) | 17,898 lb. (8,118 kg) |
| PTO hp at 2,200 engine rpm | 200 (149 kW) | 225 (168 kW) |
| Rated speed | 2,200 rpm | 2,200 rpm |
| Type | In-line, 6-cylinder,
wet-sleeve, valve-in-head | In-line, 6-cylinder,
wet-sleeve, valve-in-head |
| Aspiration | Turbocharged and air-to-air aftercooled | Turbocharged and air-to-air aftercooled |
| Displacement | 466 cu. in. (7.6 L) | 496 cu. in. (8.1 L) |
| Bore and stroke | 4.56 x 4.75 in. (115.8 x 120.7 mm) | 4.56 x 5.06 in. (115.8 x 128.5 mm) |
| Compression ratio | 15.0 to 1 | 15.8 to 1 |
| Lubrication | Full-pressure, full-flow filtration with bypass | Full-pressure, full-flow filtration with bypass |
| Cooling system | Gear-driven centrifugal pump, with recovery tank | Gear-driven centrifugal pump, with recovery tank |
| Replaceable valve-seat inserts | Inlet and exhaust | Inlet and exhaust |
| Type | In-line, fuel injection with electronic governor | In-line, fuel injection with electronic governor |
| Filter | Spin-on primary filter with water separator bowl and clamp on final filter | Spin-on primary filter with water separator bowl and clamp on final filter |
| Type | 16-speed Power Shift; 16 F, 4 R | 16-speed Power Shift; 16 F, 4 R |
| with two batteries | ||
| Alternator | 140 amps | 140 amps |
| Total cold cranking amps | 1850 | 1850 |
| Final Drive type | Inboard planetary | Inboard planetary |
| Axles: | Rack-and-pinion | Rack-and-pinion |
| 110.5 in. (2808 mm x 100 mm) | NA | NA |
| 118.5 in. (3012 mm x 100 mm) | NA | NA |
| 118.5 in. (3012 mm x 110 mm) | Standard | Standard |
| Differential lock | Electrohydraulic | Electrohydraulic |
| 2WD tread range | 60 to 84 in. (1,524 to 2,134 mm) | NA |
| MFWD tread range | 60 to 88 in. (1,524 to 2,235 mm) | 60 to 88 in. (1,524 to 2,235 mm) |
| Type | Closed-center, pressure/flow compensated | Closed-center, pressure/flow compensated |
| Selective control valves | 3 standard | 3 standard |
| Additional valves | 4th and 5th optional | 4th and 5th optional |
| Main pump | Axial piston | Axial piston |
| Primary and charge pump | Gear pumps | Gear pumps |
| Maximum pressure | 2,900 psi (20,000 kPa) | 2,900 psi (20,000 kPa) |
| Rated flow at pump | 30 U.S. gal./min. 25 Imp. gal./min. (1.9 L/s) | 30 U.S. gal./min. 25 Imp. gal./min. (1.9 L/s) |
| Available flow at SCVs | 30 U.S. gal./min. 25 Imp. gal./min. (1.9 L/s) | 30 U.S. gal./min. 25 Imp. gal./min. (1.9 L/s) |
| Category | 3/3N | 3/3N |
| Sensing | Electrohydraulic | Electrohydraulic |
| Standard lift capacity | 11,700 lb. (5,307 kg) | 11,700 lb. (5,307 kg) |
| Optional lift capacity | 15,650 lb. (7,099 kg) | 15,650 lb. (7,099 kg) |
| Type | Independent | Independent |
| 13/4-in. 1,000 rpm | Standard | Standard |
| Additional 13/8-in. 1,000/540 rpm adaptor | Optional | Optional |
| Type | Hydrostatic power | Hydrostatic power |
| Type | Power, hydraulic wet-disk | Power, hydraulic wet-disk |
| Fuel Tank | 135 U.S., 112.5
Imp. gal. (512 L) | 135 U.S., 112.5
Imp. gal. (512 L) |
| Cooling system | 28.8 U.S., 23.9
Imp. qt. (27.2 L) | 30 U.S., 25 Imp. qt. (28.4 L) |
| Crankcase | 26.4 U.S., 22 Imp.
qt. (25.0 L) | 29.6 U.S., 24.6
Imp. qt. (28.0 L) |
| Transmission, differential, hydraulic systems | 148 U.S., 123 Imp.
qt. (140 L) | 148 U.S., 123 Imp.
qt. (140 L) |
| MFWD differential | 11.5 U.S., 9.6 Imp.
qt. (10.9 L) | 11.5 U.S., 9.6 Imp.
qt. (10.9 L) |
| MFWD wheel hubs, each | 3.2 U.S., 2.6 Imp.
qt. (3.0 L) | 3.2 U.S., 2.6 Imp.
qt. (3.0 L) |
| 2WD | 122.8 in. (3,120 mm) | 122.8 in. (3,120 mm) |
| MFWD | 116.1 in. (2,950 mm) | 116.1 in. (2,950 mm) |
| MFWD axle clearance | 23.2 in. (590 mm) | 23.2 in. (590 mm) |
| 2WD | 17,030 lb. (7,725 kg) | NA |
| MFWD | 18,523 lb. (8,402 kg) | 18,709 lb. (8,486 kg) |