Competitive Comparison: 9230 4WD Articulated Tractor

Specification CASE IH 9230

ENGINE

Engine Horsepower (kW) 235 (175)

PTO hp (kW) 202 (151) est

Cu. in Disp.(L) 1-6TA/505 (8.3)

Operating RPM 2200

Op torque-lb ft (Nm) 561 (761)

Peak torque-lb ft (Nm) 701 (950)@1500

Engine Torque Rise % 25

TRANSMISSION

Type Full P.S,

Speeds Fwd/Rev 12/3

On the go wo clutch 12

Field speeds 3-8 mph 6(1)

Speed Range mph 2-17.3

Speed Range km/h 3.2-27.8

Clutch Type Wet Disc

AXLE

Size-in(mm) 4 (102)

Length Std-in(mm) 120 (3048)

Length Opt-in(mm) Not Offered

Tread Adjust-in(mm) (std) 60-132 (1524-3302)

Tread Adjust-in(mm) (opt) Not Offered

Turning radius-in(mm) @ tread setting 60 (1524)12)

Center drawbar-ft(m) 12.8 (3.9)

Center out tire, in set -ft(m) 15.3 (4.7)

HYD.SYSTEM PFC

Flow-US gpm (1/min)

Pump (flow) 28 (109)

Remotes (flow) 28 (109)

Press @ pump-psi

Pump (pressure) 2500 (17,237)

Remotes (pressure) 2500 (17,237)

No remotes stdiopt 3/1

Specification CASE IH 9230

Flow controls in cab - std/opt 1 Std/3 Opt

Hitch Category III

Lift Capacity 12,750 (5783)

24" (610mm) Back-lb(kg)

GENERAL

Fuel Cap-gal(L) 115 (435)

Wheelbase-in(mm) 120 Std 124 Steerabi

Oscillation-degrees 22 Total

Steering-degrees 40/46

Min Shipping Wt-lb(kg) 17,750 (8051 )( 3

Avg Shipping Wt-lb(kg) 24,788 (11,244) 4

Max Operating Wt-lb(kg) 26,000 (11,793)

DNA = Data Note Available NA Not Applicable

1 FieldSpeedsfrom3-8mph(4.8-12.9km/h)at 2 Turningradiusmeasuredfromoenterofcircleto 3 923OMinimumshippingweightonl8.4x38

rated rpm, center of drawbar and center of outside tire, singles, no options.

innermost setting,

4 9230 Average shipping weight on 18.4 x 38 hub

duals, pto, tph, and steerable axle.

Sales Features

* Optional operator controlled differential locks provide increased * PFC hydraulic system with superior performance and

traction in tough or muddy field conditions. efficiency.

* Live Independent 1 000 rpm PTO for increased flexibilty and * Category III three-point hitch 12,750 lbs. (5783 kg) lift capacity

adaptability. vvfth electronic position control.

* Excellent, all-around visibility in the cab, with a quiet, Full Powershift Transmission achieves superior performance in

comfortable environment. a simple, reliable design.

* Permantly lubed u-joints never need greasing. Reduces * 6TA - 830 Engine has 15 more horsepower. It has an

service time, improves uptme. outstanding reputation for lugging ability and fuel economy.

* Steerable Front Axle allows steering corrections in row crops

and tight turns at headlands. Bar a)de provides easy row

spacing with duals.