9250 4WD Articulated Tractor

Specification CASE IH 9250

ENGINE Cummins

Engine Horsepower (kW) 300 (224)

PTO hp (kW) 252 (195) est

Cu. in Disp.(L) 1-6TA/61 1 (1 0)

Operating RPM 2100

Op torque-lb ft (Nm) 750 (1017)

Peak torque-lb ft (Nm) 1015 (1376)@1400

Engine Torque Rise % 35

TRANSMISSION

Type Full P.S.

Speeds Fwd/Rov 12/3

On the go wo clutch 12

Field speeds 3-8 mph 6(1)

Speed Range mph 2-17.3

Speed Range kn-dh 3.22-27.8

Clutch Type Wet Disc

AXLE

Type Outboard Planetary

Tread Adjust-in(mm) (std) Fixed

Opt Axle or Wheel Equip Inboard Plan/Bar

Size-in(mm) 4 (102)

Length Std-in(mm) 120 (3048)

Tread Adjust-in(mm) (opt) 50-132 (1524-3353)

Differential Lock Opt Dif Locks

Turning Radius

Center drawbar-ft(m) 15.5 (4.72 )121

Center out tire, in set -ft(m) 18 (5.49)

HYD.SYSTEM PFC

Flow-US gpm (1/min)

Pump (flow) 27(102)

Remotes (flow) 27(102)

Press - psi (kPA)

Pump (pressure) 2500 (17,237)

Specification CASE IH 9250

Remotes (pressure) 2500 (17,237)

No remotes std/opt 4/0

Flow controls in cab - std/opt 1 Std/3 Opt

Hitch Category III

Lift Capacity 12,750 (5783)

24" (610mm) Back-lb(kg)

GENERAL

Fuel Cap-gal(L) 200 (757)

Wheelbase-in(mm) 131 (3327)

Oscillation-degrees 26

Steering-degrees 40

Min Shipping Wt-lb(kg) 23,000 (10,454)13)

Avg Shipping Wt-lb(kg) 27,446 (12,449)(4)

Max Operating Wt-lb(kg) 32,000 (14,545)