9370 STEIGER 4WD
ENGINE AND CAPACITIES
Horsepower, SAE gross engine 360 (268 kW)
Horsepower, PTO (@ standard PTO speed) 310
Engine model .
Number of cylinders
Displacement
Speed, rated full load
Speed, idle
Bore
Stroke
Compression ratio
Cylinder sleeves
(231 kW) estimated Cummins NTA-855-A 6 855 cu. in. (14 L) ..., 2100 rpm 850 to 900 rpm 140 mm 152 mm 14 to I wet-type, can be removed
Governor speed, w/o load 2300 rpm
Engine oil capacity w/filter 10.2 gal. (38.6 L)
Oil change interval 250 hrs.
Oil filter change interval 250 hrs.
Cooling system 16.5 gal. (62.5 L)
Fuel capacity 270 gal. (1022 L)
Battery capacity, volts/total amps 12/1875
TRANSMISSION
Type
12x3 SynchroShift ... ................................ standard
24x6 hi-low SynchroShift optional
12x3 powershift optional
Control actuated by hand levef'
optional Hi-Low w/toggle switch
Brakes single caliper,
18 in. (457 mm), dual-piston
hydraulically actuated system
HYDRAULICS
Type closed-center, load sensing,
pressure compensating
Steering I I .. full prior4, two double-acting cylinders
Remote valve closed-center stack type
Implement pump capacity @ 2100 rpm
W/powershift 27 gpm (102.2 Umin)
W/SynchroShift 30 gpm (1 13.6 Umin)
Steering pump capacity @ 2100 rpm
W/powershift 31 gpm (1 17.3 L/min)
W/SynchroShiff 34 gpm (128.7 Umin)
Maximum system pressure 2900 psi (19995 kPa)
Couplings ISO standard lever-type
HITCH
Type optional; 3-pt., Cat. IVN
Hitch coupler (adjustable) Cat. III or Cat IVN
Control hand lever
Valve type Ahree position:
lift, hold and lower
Draft arms type rigid swing-type w/
manual float adjustment
Lift capacity 17,000 lbs. (7711 kg)
OECD static @ 24 in. (610 mm) back
PTO
Optional; fully independent 1000 rpm
ARTICULATION / STEERING
Turning radius 17 ft. (5.2 m) drawbar
centerline to center of circle; 1 8 ft. (5.49 m)
to center of outside single tire
Frame articulation 42 degrees left/right
Frame oscillation (w/o PTO) plus/minus 14 degrees
(28 degrees total)
DIMENSIONS
W/ 20.8 x 38 R 1 tires
Wheelbase 144 in. (3658 mm)
Height to top of exhaust 149.6 in. (3800 mm)
Front axle clearance 31.5 in. (800 mm)
Length
Frame 259.8 in. (6599 mm)
Overall 281 in. (7137 mm)
Drawbar height 19.@in, (487 mm)
Drawbar pin dimensions 1.75 in. (44 mm)
diameter x 9.19 in. (233 mm) length
Width, outside of fenders 96 in. (2438 mm)
Average operating weight, w/24.5R x 32 Rl spacer band duals, no options 30,416 lbs. (13796 kg) Max. operating weight 40,000 lbs. (15790 kg)