7140 Series Magnum Tractor

Specification CASE IH 7140

ENGINE Case IH 8.3L

Advanced PTO hp(kw) 195 (145.4)

OECD tested PTO hp (kW) 197.53 (147.30)

OECD tested max PTO hp (kW) 208.85 (155.74)

Cu. in Disp.(L) 1-6TA/505 (8.3)(1)

Operating RPM 2200

Op torque-lb ft (Nm) 561 (761) @ 1500 rpm

Peak torque-lb ft (Nm) 701 (950) @ 1500 rpm

TRANSMISSION Full Powershift

Speeds fwd-rev/opt 18-4/24-6

On the go wo clutch

w/o clutch/opt 18/24

Field speeds/opt 7/7'2)

Type of Shuttle Shift Power

Clutch Type Wet Disc

REAR AXLE

Diameter-in(mm) 4 (102)

Length Std-in(mm) 114 (2896)

Length Opt-in(mm) 96/120 (2438/3048)

Std tread adj-in(mm) 60-133 (1524-3378)

Opt tread adj-in(mm) 60-160 (1524-4064)

MFD axle tread adj-in (mm) 60-95 (1524-2413)

MFD turning radius

Center drawbar-ft(m) 18.1 (5.52) ( 3 , 4

Center out tire, in set -ft(m) 20.8 (6.34)

HYD.SYSTEM PFC

Pump flow US-gpm(L) 28.5 (108)

Flow @ remotes-gpm 2.5-22 (9.5-83)

Press - psi (kPA) 2,650 (17926)

Press @ remotes-psi (kPA) 2,475 (16700)

Flow controls in cab - std/opt 4 opt

Tstd OECD stat htch cap lb (kg) 10,036 (4460)

Min Ship Wt-lbs(kg) 16,480 (7475) Page 2

Specification CASE IH 7140

Fuel Capacity-gals(L) 95 (360)

Cab glass area-sq ft(m) 47.9 (4.45)